Depending on its purity, nitrous oxide (often called “laughing gas”) is widely used in the food, medical, and semiconductor industries.
Jinhong Gas has greatly improved the purity and production capacity of nitrous oxide through continuous technological updates, and is one of the outstanding suppliers in the semiconductor field.
Nitrous oxide may be used as an aerosol propellant in various fields:
-for whipped cream (because it improves the foaming characteristics of the cream), syrups, concentrates of coffee, chocolate and various flavours, sauces for grilled meats, vinaigrette etc. -pharmaceutical field
-cosmetics (perfumes, eau de cologne, hair spray, etc.)
-household products, paints and varnishes, insecticides
-aerosols for use at low temperature, such as de-icers, engine starting boosters, etc.
Nitrous oxide is obtained most commonly by the thermal decomposition of ammonium nitrate. It may also be obtained by controlled reduction of nitrites or nitrates, by the slow decomposition of hyponitrites, or by the thermal decomposition of hydroxylamine.
Jinhong recycles the exhaust gas, purify and refine it to get high-purity nitrous oxide, the key point is to control the content of CO2 and moisture before the gas entering into rectifying tower.
The annual output of Jinhong Gas's 5N5 N2O gas has exceded 9,000 tons.
High-purity nitrous oxide gas (≥5N) is mainly used in semiconductor, LCD, OLED manufacturing process. High purity nitrous oxide is an important raw material for PECVD process accumulation of SiO2 film, device anti-reverse penetration film, passivation membrane.
Nitrous oxide is commonly used as a general anaesthetic in both medical and dental surgeries. To be effective as an anaesthetic, nitrous oxide must be inhaled in relatively high concentrations mixed with air or oxygen.
Nitrous oxide serves in industry as a leak detector for vacuum and pressurized enclosures, buried piping, etc.
Nitrous oxide is used as an oxygen source in the chemical vapour deposition of silicon oxynitride layers.
Nitrous oxide is used in calibration mixtures for environmental control.
Nitrous oxide is used as an oxygen enrichment medium for high performance internal combustion engines (Drag racing)
Nitrous oxide is used as raw material for the production of rocket fuel.
Nitrous oxide is obtained most commonly by the thermal decomposition of ammonium nitrate.
Yes, Nitrous oxide (N2O) is a greenhouse gas, and is one of the six greenhouse gases specified in the Kyoto Protocol. N2O is long in the atmosphere and can be transported to the stratosphere, while N2O is one of the substances leading to the loss of the ozone layer.
Compared with carbon dioxide, although the content of N2O in the atmosphere is very low, but its single-molecule warming potential is 298 times that of carbon dioxide (IPCC, 2007); the warming effect on the global climate will become increasingly prominent in the future.
The modified vehicle using the nitrogen-oxygen acceleration system sends nitrous oxide into the engine, and when heated, it is decomposed into nitrogen and oxygen, which improves the combustion rate of the engine and increases the speed. Oxygen has a combustion-supporting effect and accelerates the combustion of fuel.
ProcessThe industrially used ethylene production methods include petroleum hydrocarbon cracking, ethanol catalytic dehydration, coke oven gas separation, etc. Due to the abundance of oil and natural gas resources, large-scale production of ethylene has lo...Learn More
Process1.Chlorohydrination: First pass ethylene and chlorine gas into water to generate 2-chloroethanol, and then react alkali (usually milk of lime) with 2-chloroethanol to generate ethylene oxide. 2.Oxidation: Using air or oxygen with a concentratio...Learn More
ProcessTEOS is obtained by esterification of silicon tetrachloride and ethanol at normal temperature and pressure. TEOS tained by adsorption, distillation and filtration. Jinhong has reached strategic cooperation with major semiconductor companies, an...Learn More
ProcessSilane is produced by the reduction of silicon tetrachloride by metal hydrides such as lithium or calcium aluminum hydride. Silane is produced by treatment of magnesium silicide with hydrochloric acid. GasSilaneCAS No.7803-62-5Purity≥99.9%Learn More
ProcessOctafluorocyclobutane can be produced by the dimerization of tetrafluoroethylene through pyrolysis, quenching, filtration, compression, etc; Octafluorocyclobutane can also be obtained by electrolysis of tetrafluorocyclobutane in anhydrous hydrogen ...Learn More
ProcessHydrogen is most frequently produced for on-site usage by steam reforming of natural gas. Such plants may also be used as sources of hydrogen for the merchant market. Other sources are electrolysis plants, where the hydrogen is a by-product of chlo...Learn More
ProcessSulphur hexafluoride is manufactured by direct fluorination of pure (elemental) Sulphur, generally by companies who produce fluorine for other purposes such as the production of fluorocarbons. JinHong can also provide sulfur hexafluoride to mee...Learn More
ProcessOxygen is obtained on a commercial scale by the liquefaction and subsequent distillation of air. For very high purity oxygen it is normally necessary to take the product from an air separation plant through a secondary purification and distillation...Learn More
ProcessAcetylene is manufactured commercially by reaction between calcium carbide and water, and as a by product of ethylene production. GasAcetyleneCAS74-86-2Purity≥98.0%Learn More
ProcessNitrogen is produced in large quantities at air separation plants which liquefy and subsequently distil air into nitrogen, oxygen and usually argon. If very high purity nitrogen is required the nitrogen produced may need to go through a secondary p...Learn More
ProcessCarbon dioxide is recovered from many different sources. It is obtained as an off-gas from fermentation processes, lime-stone kilns, natural CO2 springs, as well as gas streams from chemical and petrochemical operations. Recently, CO2 is also recap...Learn More
ProcessThe most common source of argon is an air separation plant. Air contains approx. 0.93% (vol.) argon. A crude argon stream containing up to 5% oxygen is removed from the main air separation column via a secondary (“side-arm”) column. The crude argon...Learn More
ProcessAmmonia is manufactured by the Haber-Bosch process, consisting of a direct reaction between hydrogen and nitrogen, in the molar proportions 3:1. Ammonia is manufactured by the Haber-Bosch process, consisting of a direct reaction between hydroge...Learn More