All Categories

Production and Preparation of Electronic Specialty Gases

Date: Nov 14, 2023

Electronic specialty gases are a category of gases widely used in the electronics industry and semiconductor manufacturing, known for their high purity and stability. These gases play a crucial role in semiconductor manufacturing, the photovoltaic industry, and other high-tech fields. This article will explore the production and preparation processes of electronic specialty gases, as well as their significance in modern technological applications. However, please note that this article provides only a brief overview of some common gas processes and does not include specific methods or recommendations for the preparation of individual gases. The specific preparation should be conducted in appropriate settings and equipment.

Ⅰ. Types and Applications of Electronic Specialty Gases:

Electronic specialty gases primarily include nitrogen, argon, helium, hydrogen, oxygen, and others. They are widely used in high-tech fields such as semiconductor production, laser technology, photolithography, electron microscopy, and more. Different electronic specialty gases exhibit distinct characteristics and applications in these areas.

In recent years, with the increasing popularity of clean energy topics, hydrogen has gained attention as a new energy source. Additionally, in laboratory environments, electronic specialty gases are used in various experiments, reactions, and analyses to ensure the purity and controllability of the experimental conditions.

Overall, electronic specialty gases play a crucial role in high-tech industries, driving the continuous development and innovation in fields such as semiconductor manufacturing, laser technology, photolithography, and more. The applications of these gases contribute to the progress of modern technology, providing reliable support for the operation of various advanced technologies and equipment.

Ⅱ. Production Methods of Electronic Specialty Gases:

1. Air Separation Method (ASU): This is a common method for producing electronic specialty gases by separating components such as oxygen, nitrogen, and argon from the air to obtain high-purity gases. This method is widely used in the production of nitrogen and argon. Through the air separation method, electronic specialty gases can be efficiently produced, ensuring their high purity and stability to meet the strict standards of gas purity required in high-tech fields such as semiconductor manufacturing and laser technology.

The choice of these production methods depends on factors such as the type of desired gas, purity requirements, and production scale. In the production process of electronic specialty gases, strict quality control and process optimization are crucial to ensuring the final product meets the standards for high-tech applications.

The production process is roughly as follows:

A. Firstly, atmospheric air is collected as raw material. Typically, air consists mainly of nitrogen (approximately 78%), oxygen (approximately 21%), argon (approximately 0.93%), and trace amounts of other gases.

B. The collected air needs to be compressed to increase the density and concentration of gases. This step usually involves multi-stage compression, compressing the air to higher pressures.

C. The compressed air undergoes cooling through a cooling system. At low temperatures, the kinetic energy of gas molecules decreases, making the gas more easily liquefiable. The purpose of this step is to cool the air to near its liquefaction point.

D. Separation is carried out using techniques such as low-temperature distillation or molecular sieves to obtain nitrogen, oxygen, argon, and other components. Separation steps mainly include low-temperature distillation and molecular sieving.

E. Impurity removal: Through further processing steps such as distillation and adsorption, residual impurities are removed to ensure the high purity of the obtained gases.

F. The separated high-purity gases are usually stored in pressure vessels in liquid or gaseous form. As needed, the gases can be transported to target locations through pipelines or other distribution systems.

G. To improve resource utilization efficiency, some waste gases produced during the manufacturing process are typically treated to recover useful gases. This helps reduce production costs and environmental impact.

2. Catalytic Cracking Method: The catalytic cracking method is a process for producing specialty gases by catalyzing the decomposition of hydrocarbons at suitable temperature and pressure using a catalyst. In this process, typically natural gas or other hydrocarbons serve as the raw materials. They are heated to high temperatures, and in the presence of a catalyst, undergo cracking reactions to produce specific gases, such as hydrogen. The key to this method lies in the selection and design of the catalyst to enhance the selectivity and yield of the reaction. Catalytic cracking not only achieves efficient gas production but also boasts advantages of lower energy consumption and environmental friendliness. As a result, it finds widespread application in the production of specialty gases like hydrogen.

3. Gas Adsorption Method: The gas adsorption method is a process for producing specialty gases through the selective adsorption and desorption of gas mixtures using adsorbents. In this process, the original gas mixture passes through an adsorption tower filled with highly selective adsorbents, such as molecular sieves or activated carbon. The pore size and adsorption affinity of the adsorbent can be designed based on the molecular size and properties of the target gas. By controlling pressure and temperature, the target gas is adsorbed onto the adsorbent while non-target gases pass through, achieving gas separation. Subsequently, by adjusting conditions such as raising the temperature or lowering the pressure, desorption of the adsorbent is carried out to obtain high-purity specialty gases. This method is characterized by its flexibility and efficiency, making it suitable for the production of various types of specialty gases, such as helium.

4. Electrolysis Method: The electrolysis method is a process for producing specialty gases by electrolyzing water or other suitable electrolytes. In this process, an electrolytic cell is typically used, containing an electrolyte solution such as water. Two electrodes (cathode and anode) are immersed in the electrolyte, and an electric current is applied. In the case of electrolyzing water, water is decomposed into hydrogen gas at the cathode and oxygen gas at the anode, a process known as electrolysis of water. By adjusting parameters such as current density, electrolyte concentration, and temperature, the rate and purity of gas production can be controlled. This method is environmentally friendly, offers good controllability, and is suitable for producing specialty gases like hydrogen. The sustainability and high purity of the electrolysis method make it an important gas production technology, especially in applications requiring high-purity hydrogen.

III. Key Technologies in the Production Process:

1. Membrane Separation Technology: Membrane separation technology is a separation method based on the semi-permeable characteristics of membranes. It achieves the separation and purification of gas mixtures by selectively allowing gas molecules to pass through the membrane. In this process, the gas mixture is introduced into a membrane separation device containing membranes with specific permeability. Due to the different permeation rates of various gas molecules on the membrane, some molecules can pass through, while larger or incompatible molecules are intercepted. By applying a pressure difference, gases on the high-pressure side pass through the membrane to the low-pressure side, thereby effectively achieving gas separation. This technology is widely applied in areas such as gas purification, air separation, and natural gas processing, providing a feasible solution for efficient and environmentally friendly gas separation.

2. Pressure Swing Adsorption (PSA) Technology: Pressure Swing Adsorption (PSA) technology is a method for gas separation and purification achieved by adjusting the adsorption and desorption processes of an adsorbent at different pressures. In this technology, a gas mixture passes through an adsorber filled with adsorbent, and by adjusting the pressure, the adsorption capacity of the adsorbent for a specific gas changes accordingly. Subsequently, by lowering the pressure, the adsorbent releases the adsorbed gas, releasing the target gas. In this process, the adsorbent exhibits varying affinities for different gases, allowing effective separation of various gases in the pressure swing cycle. PSA technology is commonly used in gas purification and separation, particularly in applications involving the production of high-purity gases or the removal of impurities from gas mixtures.

3. Catalyst Design: Catalyst design is a complex engineering process involving the design and optimization of catalysts to facilitate chemical reactions. The goal of this process is to enhance reaction rates, selectivity, and catalytic activity, thereby more efficiently converting reactants into products. The key to catalyst design lies in selecting appropriate catalyst materials and precisely controlling their surface structure and chemical properties. By adjusting the crystal structure, pore structure, and composition of active sites of the catalyst, designers can achieve specific impacts on the target reaction. Catalyst design not only considers reaction rates but also focuses on aspects such as catalyst stability, resistance to poisoning, and renewability. Advances in this field are crucial for improving the efficiency of chemical processes, reducing energy consumption, and minimizing environmental impact.

IV. Applications of Electronic Specialty Gases:

1. Semiconductor Manufacturing: In semiconductor manufacturing processes, nitrogen, argon, and hydrogen are commonly used gases. Gas mixtures, typically containing nitrogen and argon, are frequently employed in semiconductor photolithography processes as background gases for photolithography machines. These gases ensure the high precision and quality of the photolithography process in semiconductor manufacturing.

2. Laser Technology: Helium and argon are widely used in laser technology for generating laser sources. Helium is commonly used in helium-neon lasers, which are a common type of laser source producing visible light. When helium is electrically excited, the resulting excited-state helium atoms can release photons through collisions with neon atoms, thereby generating laser light. This type of laser is widely applied in fields such as medicine, scientific research, and graphics processing. Argon, on the other hand, is often used in argon ion lasers, which produce ultraviolet laser light. Argon ion lasers find important applications in scientific research, biomedical fields, semiconductor manufacturing, and more. Due to the inertness and high purity of argon, it ensures stability and reliability in the laser process.

3. Photolithography Technology: In semiconductor manufacturing, photolithography technology requires high-purity gases as background gases to ensure the accuracy and quality of microelectronic devices. Nitrogen is widely used for atmosphere control during the photolithography process. By providing a high-purity nitrogen environment, it ensures inertness and stability in the process environment within the photolithography machine. This helps prevent oxidation reactions and other contaminants, ensuring the preparation of high-quality patterns in the fabrication of fine semiconductor devices.

Argon is primarily used as the background gas in photolithography machines. After the photoresist is exposed, the pattern is projected onto the silicon wafer through the projection optical system of the photolithography machine. Argon, as the background gas, maintains the stability of the photolithography machine, contributing to increased pattern resolution and accuracy.

In addition, helium also plays a role in certain photolithography technologies, such as laser lithography. Helium's low refractive index and high thermal conductivity make it an ideal gas medium for the transmission and focusing of light in laser lithography machines, enabling the production of finer patterns.

The production and preparation of electronic specialty gases constitute a crucial aspect of modern high-tech industries. Through advanced production techniques and precise preparation processes, we can obtain high-purity and stable electronic specialty gases, thereby ensuring the development and progress of fields such as semiconductor manufacturing and laser technology. In the future, with the continuous advancement of technology, the production techniques for electronic specialty gases will also undergo constant innovation to meet the growing demands of the high-tech industry.

Hot categories